You are using an interrupted intent explorer. Please upgrade your browser for seamless shopping. Upgrade
Current Page
  1. Home
  2. SHOP
  3. Standard
Visit Store
Buy it now


B3F [Bikefit By Body Form]
: Speed Up, Pain Out

3-Way Stabilizion

How to Work
: How B3F Works

The B3F Seatpost incorporates the Formega, a '3-Way Stabilization' technology, that allows the bike seat to move top-to-bottom and left-to-right together with the thigh and hip muscles, significantly reducing friction between the seat and the hip

Existing Bike Seatposts and Saddles

Problems with fixed saddles

Existing bike saddles are in fixed position. So riders pedalling on top of the fixed saddle feel discomfort due to the interruption of pelvic movement. Also riders feel pain and discomfort due to the impact from the ground deliverd to the pelvis diretly.
If rider's right foot pushes downward, pelvis tilts to the right as the center of gravity moves to the right and left pelvic bone leaves the saddle at the same time. It reduces power generated from pedalling because friction is created from the inside thigh muscles trying to push the right-side of saddle towards the back. Also riders experience pelvic pain from left pelvic bone because the fixed addle bumped against each other while pedalling from the left.

The problem of shock absorbing seatposts and saddles

Existing seatposts with dampers were designed to absorb impact from the ground by declining the whole saddle position but dampers also absorb and reduce power that needs to be deliverd to the pedal. And existing saddles with dampers can absorb impact from the road due to its inflection point of movement located in the front of saddles but the dampers also absorb and reduce power generated from pedalling.

When we walk, the width between our left and right feet is narrow, so when we step forward, our pelvis, knees and feet are aligned straight in the direction of gravity.
pedal and left pedal the pelvis, knees and feet are not aligned in the direction of gravity. So the angle of the knee bends inside bcause the knee gets stressd. This condition pedal can cause knee pain and reduced power.

B3F Seatpost

The birth of a perfect solution

The B3F Seatpost is equipped with a Formega. The patented technology using elastic rubber called 'Formega' which enables bike saddle to move in triaxis (X,Y,Z) from the center of the saddle. This patented technology solves all of the saddle passing power absorption problems when pedaling.

B3F 3-Way
* Although the gap between pedalling is large, flexibility of Formega allows the saddle and pelvis move together. This allows pelvis, knees, and foot aligned to the direction of gravity and increases power without injuries.
* It allows extra safety to riders in cornering because it moves the center of gravity naturally either to the left or to the right.

1. When the crank arm rotating from 12 o'clock position to 3 o'clock position.

Rotating from Pedalling 12 to 03
When a person walks, the upper and lower body move forward simultaneously. So the pedalling is moving just like walking. When the foot position falls, the posiong of the hipbone moves from the rear of the saddle to the center of the saddle, causing the power of pedalling to pass to the bike.

2. When the crank arm rotating from 12 o'clock position to 3 o'clock position.

Rotating from Pedalling 03 to 06
The power of pedalling delivered to move the bike forward reaches the maximum output and this causes body to move backwards which positions the hipbone to the back of the saddle again. The saddle tilt to the right with the body and the left pelvic bone stays on the saddle as the right foot pushes downward. When thigh inner muscles pushes the side of the saddle, the saddle rotates to the right and this reduces friction between the leg and the saddle, which increases power from pedalling. B3f seatpost has it's inflection point in the middle of the Formega which is designed to prevent absorbing power from pedaling. The elasticity of Formga allows the back of the saddle to move downward with riders weight so it prepares to bounce off to create more power.

3. When the crank arm rotating from 12 o'clock position to 3 o'clock position.

Rotating from Pedalling 06 to 09
AS the rider's body weight and the center of body moves to the left. The elasticity of Formga simultaneously bounces to create more power by lifting right pelvic bone when the pedalling starts on the left. This increased pedalling of power reduces muscle fatigue because less body energy is needed for pedalling. Also, rider are relieved from saddle pain because left pelvic bone and the saddle stayed together. And "From 12 o'clock position to 3 o'clock position" will connect the same movement.

4. When the crank arm rotating from 12 o'clock position to 3 o'clock position.

Rotating from Pedalling 09 to 12
Due to the elasticity of Formga, the occupant's weight naturally moves to the left. And "From 3 o'clock position to 6 o'clock position" will connect the same movement. Pedal operation ends with the left pedal and resumes from 1 starts.

Benefit of B3F

Reduction of Friction
Reduction of Friction
The bike seat mounted on b3f significantly mini mizes friction and increases speed and reduce pain when the hip and bike seats move together.

Bounding Pedaling
Bounding Pedaling
The bound pedalling created by the combination of elasticity of FORMEGA and triaxial movement of saddle helps increase power and speed of the bike. It also reduces muscle fatigue.

Prevent Wear on Clothes
Prevent Wear on Clothes
The reduced friction minimizes the wear and tear on bike clothes. Moreover, it is economical since it is compatible with the existing bike seat rail already being used.

Reduction of Fatigue
Reduction of Fatigue
Formega absorbs the vibrations and shocks created from the irregular road surface, minimizing pain and fatigue.

Because the bike seat moves accordingly with the user's center of gravity, the slant angle can be minimized during cornering, allowing for increased safety and speed (as pedaling while cornering becomes possible).

Nose Down
Nose Down
If riders have done urgent breaking, when the bike stops but the rider moves forward by action of inertia. So it keeps a rider from rollover accidents by pressing Formega of the saddle forward with bodyweight of the rider.

: Before and after use of the B3F seatpost measured by power meter

The data below presents a comparison between before and after using B3F Seat Post. A computrainer was used. In brief, after the experiment, participants expressed that B3F reduced knee pain and/or other uncomfort.

The computrainer was used to measure power (Watts), speed (KPH), and number of rotations (RPM) between the conventional seat post and B3F Seat Post.

Ms.Eun○ Bak: Lateral(outside) right knee pain.

RESULT: Overall, torque, speed, and rotation were increased. The knee-line posture was normalized. Knee pain was reported to be resolved.

Mr.○ Lee: Waist(lower-back) pain and perineum pressure.

RESULT: The knee-line posture was normalized. Lower-back pain and perineum pressure were reported to be resolved.

Mr.Jun○ Hong: Waist(lower-back) and left knee pain.

RESULT: The knee-line was normalized. The shoulders became leveled, reducing lower-back pain and discomfort.

Mr.○ Lee: The right inner-thigh pain, bent hip, and (left-right) leg length imbalance.

RESULT: The knee-line was normalized. The shoulders became leveled, reducing pain and discomfort.

Mr.U○ Kim: lower-back pain and numb feet.

RESULT: The knee-line was normalized. The shoulders became leveled, reducing back pain and discomfort.


Manaul Download

: B3F Seatpost installation and setting

Above is a video explaining the configuration and installation of B3F Seatpost.
Please take a look below to best select a bike seat that best matches your body type.
Most benefit comes from a good compatibility between B3F Seatpost and bike seat, so choosing the right bike seat to complement with the B3F Seatpost is very important.


: Details of B3F Seatpost

Diameter 27.2mm (Standard) / 25.4mm (only Brompton)
Offset 0mm (Zeroback) / 20mm (Setback) / 0mm (Brompton)
Total Length 370mm (Standard) / 85mm (Brompton)
Tube Length 350mm (Standard)
Width 55mm
Height 70mm
Weight 278g (Setback & Zeroback) / 198g (Brompoton)

Seatpost Tube UD Carbon
Brompton Pentaclip Main Frame Hard Anodized CNC Alloy
Formega Elastic Rubber
Saddle-Rail Plate Hard Anodized CNC Alloy
Blot Titanium (Grade 5)
Nut Stainless steel double Loose-proof
* All parts are 100% manufactured in Korea.

The B3F seatpost is assembled with carefully selected parts to produce the best products. It is a small part that does not come out of sight, but I made it with the desire to run with the rider with the best performance for a long time not only the riding at the time of purchase. VAZALAB wants riders to ride safe and enjoyable.
: News on VAZALAB Awards, Patents, Certificates, Magazines, Reviews


The B3F Seatpost increases speed and reduces pain by simple installation. It contains inserted Formega (elastic rubber), which enables 3-axis motion pedalling, more natural to the movement of the rider.
VAZALAB won two awards at TAIPEI CYCLE d & i awards 2018. Only two companies that won two awards this year are GIANT and VAZALAB.

Jury comments:
B3F Seatpost: Great idea to insert an elastic rubber in seat posts to lower the impact.
Brompton Pentaclip: The use of elastic rubber in seatposts provides better performance and comfort.


The technology of VAZALAB is being introduced in magazines of various countries around the world.

: B3F Seatpost can trust with patented technology in Korea


: We think rider safety first.

KSPO Physical Test Inspection


There are no posts to show

Write a Review See All


We accept the following forms of payment:
- Credit Card
  - Visa
  - MasterCard
  - American Express
  - Discover
- PayPal


  • Shipping Method : Parcel Service
  • Shipping Area : A Region.
  • Shipping Cost : International Shipping Fee
  • Shipping Time : 3 - 4 days
  • Please take into consideration that some products may take additional time for delivery and processing.
    Important: Your order is shipped once your payment has been cleared. Please contact our customer service center if you would like to request an exchange or return on your order.

    - Customs and Duties

    The recipient will be held responsible for international shipments which may be subject to import duties and taxes. Please be advised that these charges are levied by the destination country and we do not have control over them. In the case that the recipient refuses to receive the parcel, the order will be returned to Korea and will not be re-shipped. Relevant expenses (round-trip shipping, customs, etc.) will be deducted from the refund.

Returns & Exchanges

1. Requirements:

Please take into consideration that we only accept qualifying returns but not exchanges. Refunds are issued once the returned products clear our inspection.

1) An item is eligible for cancellation if:
-you posted a Return request within 24 hours of payment and your order is still under “Pending” status (if your order is under “Preparing Shipment” status, please contact our customer service center) or
-the order is delayed for more than 10 days since payment and you have not received any notification regarding the delay; or
-the ordered item is out of stock.

2) We accept return(s) if:

-you receive a product different from your order; or

-you receive a defective product.

**Return Instructions

(1) Post a return request on our Return forum within three days of receipt. You are required to attach the photos of the received product(s) and include the item code, the order number, and the reason for the return.

(2) A customer service representative will be in contact to assist you by email or phone.

(3) Items returned must be in their original condition, which includes tags and any packaging. Also, you need to include a note of your order number, name, and user ID.

*Please be advised that returns are accepted ONLY IF you followed the instructions above and your return request has been approved by our staff. Returns that are shipped to us without any prior consent are not accepted.

*Please note that EVEN the defective/incorrect item(s) must be returned with all of the tags and labels intact. The item(s) must be sent in their original packaging and unworn.

*Please include all contents of the original package and free gifts (if applicable) in your return packaging.

* Shipping fee for any return caused by our fault will be paid by the company. However, if EMS’ cash on delivery is not possible then you can scan the return receipt and either mail it with the item to return or post an image of it on the forum. The shipping fee will be refunded once the returned item has arrived.

3) We do not accept return(s) if:

-you are returning the items just because you changed your mind (on size, color, etc.)
-you are returning shoes, bags, or any other accessories
-the products are damaged due to your mishandling
-your return request is not approved by our staff

The following items are not considered defective:

* Items that are originally manufactured without tags or labels
* Items with creases that may have been made while shipping
* Items with unsatisfactory/incomplete finish due to mass production

4) If there is a missing item from your order:

*Contact our customer service center by phone or by forum (if you cannot reach us by phone) within 1 day of delivery.
*Please keep all contents of the original package including packaging material (boxes, plastic bags etc.) with you until you are instructed otherwise.

Please note that we may not be able to process the refund for your missing item if you lose or damage any packaging material.

Product Inquiry